Product
   Deck Outfitting (11)
   Deck machinery (5)
   Life saving appliances (3)
   Accommodation system (5)
   Environment protection (6)
   Mechanical machinery (9)
   Diesel engine Genuine & O... (3)
   Electric Item & LED Light... (12)
Contact Us
more  
Singapore head office
Add:57 west coast way #03-11,Singapore 127018
Tel:+65-64975829
Fax:+65-64975829
WhatsApp(Singapore):+65-91789058
Hp:+65-91789058
HP:+86-18602601729 (24 hrs)
E-mail:victech@singnet.com.sg
          victech001@126.com
Details
Local / Mechanical machinery
PUMP and SPARE PARTS
[Mechanical machinery] | HOT:7568 | Fontsize:Big  Middle  Small
 
 
GEAR PUMP
1.KCB SERIES GEAR PUMP





2.2CY SERIES GEAR PUMP




3.YCB SERIES GEAR PUMP





4.YCB-G MODEL HEAT INSULATING GEAR PUMP



5.LB TYPE GEAR PUMP FOR PEFRIGERATOR

Application 
 It is used in transferring N32 or N46 refrigerated lubricating adn other lubricant oil of ammonia machine or freon machine.Then suited temperature is 10℃-80℃. 
Model Explanations 

LB 20/0.5
Refrigerator Cyclometer Pump MPa 0.5MPa Capacity 20m3/h


6.LYB SERIES CIRCULAR GEAR PUMP

Application
 ● Type:Vertical Installed Pump For Ship
 ● Characteristic:It has characteristics of steady operating,low noise,long life and high efficiency.
 ● Temperature:The max. environment temperature is 50℃,the max. use environment temperature is 80℃.
 ● Axle Seal:This series of pump adopt mechanical sealing.It also adopts then filling seal according to the requirement of customer.
Model Explanations

LYB
20
0.6
Vertical Circular Tooth Gear Pump
Rated Flow m3/h
Rated Pressure MPa


7.NYP SERIES INTERNAL GEAR PUMP


 6)


NYP
7.0
A
Internal Gear Pump
Displacement L/100r
Code of Design Improverment


8.3RP SERIES ROTARY LOBE PUMP

BRIEF INTRODUCTION
 1)Feature
 It belongs to positive displacement pump and has the advantages of outstanding self-priming ,high efficiency and long life .It applies to delivering suspension liquid with soft solid particles,corrosive medium and suspension liquid .The delivered medium temperature range from-30℃to+180℃and viscosity range from 30cSt to 1.0×105cSt.The parts of contact with medium adopt stainless steel.
 The rotating speed can be adjusted according to the delivered medium's physical property . 
 2)Application 
 It is used for foodstuff,drink ,medicine,daily chemical,petroleum,chemical industry etc. 
MODEL EXPLANATION 

21 0.6
Displacement(L/100r) Max.Differential Pressure MPa


Screw pump
1.G SERIES MONO SCREW PUMP


IV.Trans portational medium
 Liquid with different viscosity,especially the thick medium which is difficult to transfer. 
 Liquid with different concentration and dry material which is separated an dehydrated. 
 Liquid which contains solid particle,fibre an suspended matter. 
 Mixture of liquid,gas and solid. 
 Sensibility liquid which could net be mixed , cut ang rob. 
 Corrosive liquid. 
Work Features 
 It has wide application.It could transfer all flowing medium adn non-running material. 
 It has steady flow adn pressure,no pulsation .
 Change the speed,so the output flow be modified.It could be used in measuring input. 
 It has strong inhale power , low working noise,no leak and tenperature rising. 
Lectotype of mono Screw Pump 
 Correct lectotype is important for getting best use result, In order to meet different physical or chemical properties and operating demands of medium,we suggest:the client provides the operation data,then our professional staff recoommend lectotye,at last the client confimend. 
 The necessary major operation data for lectotype: 
 Transportation medium:Name,Corrosivity,Abradability,Viscosity,Solid contains,Work temperature 
 Operation data:Flow or flow range,Max pressure ,Continuous or discontinuous operation 
 Installation Enviroment:Horizontal or vertical,fix or moving,special requirements for connect pipe line,requirements of esplosion-proof and protect. 
Application Fields(Part) 

Petro-industry
Chemical Industry and Pharmacy
Environment Engineering
Mineral Products Engineering
Food industry
Papermaking industry
1、Thickened oil delivery 
2、Oil and gas mixed delivery
3、Oil and water separate and waste oil recovery system 
4、Sewage treatment 
5、Polymer delivery

1、All kinds of paste matters 
2、All kinds of lactescence 
3、All kinds of suspension 
4、All kinds of liquid which conti-nueains gas and solid 
5、All kinds of medium which could not be mix or cut

1、Different sewage delivery 
2、Dewatering sludge delivery 
3、Measuring input of flocculent and chemical preparation 
4、Oil and water separate and waste gas desulfurization
1、Water gas equipment and delivery 
2、Production equipment of titanium white,kaoliu and hydrofiil 
Feeding to spial-flow adn filter 
3、Chemical input
4、Charging adn grouting 
5、Electrolyte treatment
1、Dairy products 
2、Juice,puree,sloughtissue and condiment 
3、Beer and brewery
1、Paw material equipment 
2、Process of coating and tinting
3、Chemical measuring 
4、Slag and waste water treatment
Work Principle

 The elastic stator with special helical surface mold cavity and the rotor weht big lead and big depth of tooth mesh and formed continuous sealing line in the mold cavity of stator,sepatate the suction cavity from the extrusion cavity.When the rotor move,the mmold cavity move to the discharge direction cotinuously,so the liquid be inhaled and discharger continuously. 
MODEL EXPLANATION AND EXAMPLE

G
F
70
2
A
G series of mono screw pump
Material of flow passage components No letters F-1Cr18Ni9Ti M-0Cr17Ni12 Mo Ti
Specifications and code
Series of pump(Lead number)
High hardness rotor


2.2W.W TWIN SCREW PUMP


Briefintroduction  
 On the base of deeply researching overseas adcancde technique,according to the present-day practical demands of gas-oil mixed transporting,2W.WH--type out board bearing double suction dualscrew multtiphase mixed transporting pump and 2W.Wseries double screw pump are researched and deceloped by our company,then we follow the regulations of the national standard GB11035-89 and produced it.Through engagement together between dricing srew and driwen screw and the match between screw andpump body hole,and then form many sealing empty cacities,when the screw is rotational,these sealin empty cavitiel move ahead continually,push the liquid in the sealing cavity to the exit and then discharged,so the purpose of transporting the liquid can bei relized.
Its working principle is as chart 1

The advantage of the twin-screw pump  
 1、Transporting the liquid smoothly without any disturbing and pulsation,no impulse,with less vibration and low noise. 
 2、It has strong selr-suction performance,when multiphase mixed transporting,the gas content can not over 80%,and the san content can not over 500g/m3.
 3、Outboard bearing structure which qdopt independently lubricate,so aoo kinds of nonlubricate medium can be transported. 
 4、It adopts synchronous gear drinving,between the two totors there is no touch at all,ecen though idling for short term is no problem. 
 5、The pump body has heating jacket,so it can transport all kinds of clean or low viscosity or high viscosity mediuum which contain the particulate solids.(the diameter of the particulate is usually less than 0.12-0.2mm) 
 6、If selecting the material correctly,some corrosive medium can be transported. 
 7、Double-suction structure,and there is no axial force on the rotor. 
 8、The shaft ends adopt mechanical seal or corrugated pipe mechanical seal,it has the characteristic of long-life,less leak,wide scope of application. 
Performance scope  
 1、The highest pressure 4.0MPa
 2、 Capacity range 1~1000m3/h
 3、Temperature range -20~120℃ 
 4、Thee ciscosity of the medium 1~3000mm2/s,when lower the speed of the rotation it can be up to 106mm2/s 
 The viscosity of the medium will largely influende the twin screw pump,the nominal discharge of the pump means the discharge under the certain ciscosity condition,in order to ensure the pump to work on the high efficiency working condition,wehn the test is not enough,we suggest to select the speed of the fotation according to the following viscosity.
     The viscosity of the mediumcSt      Speed r/min
        <400                  1500
       400 ~1200                1000 
       1200~3600                750
 When the viscosity of the medium is higher , the customer should contact with the manufacturer for the speed of rotation and motor power. 
Application example 
 1、Oil field:Used as the multiphase mixed transporting pump and crude oil transporting pump and the like which can transport oil,gas,water,tiny solid particullate. 
 2、shipbuilding:Using as marine loading pump,ballast pump an sewage treatment pump , main machine lubricating pump and fuel oil pump. 
 3、Petrochemical industry:Using as loading and transporting pump which can transport all kinds of resin,pigment , paraffinwax,paint,rinting ink,emulsoid,all kinds of oil crude oil,hesvy oil and the like. 
 4、Power plant:Using as heavy oil,crude oil transporting pump,main machine lubricating pump. 
 5、Food industry:Using as transporting pump which can transport alcohol,honey,syryp,juide,fixde oil,milk,slurry oil. 
Structure characteristics 
 This kind of pump adotp double-suction structure , both ends of screw are in the same pressure cavity,axial force an be balanced automatically.The bearing of both ends adopt external installing,an being lubricated a lone by using lubricate,so it won't be influenced bu the medium.A couple of synchronous gears are uwed to drive the screws,so the screws surface can't touch at all,an there is a tiny chearance between the two screws. the impurity in the meditm can not fray the screws surface directly(escept scour) .
 Except some less discharge ppumps (below the 2w.w 4.0),generally,internal safety valve will be installed on the pump body,when the discharge pressure is over the rated value,it will have certain protection function.There are two entrance-exit directions ,one is horizontally enter and horizontally exit;the other is horizontally enter and vertically upwards exit; the user can choose according to thir own demands. 
MODEL EXPLANATION AND EXAMPLE

2W.W
H
6.1
64
B
Series code
Mix-transportation type
Spec code
Screw pitch
Seal code
Material code
 1、The illustration of the code series 
     2W.W:horizontal outboard bearing 
   2W.N:horizontal inboard bearing
 2、The illustration of the specification code 
   Specification code express the size of pump and work capability scope, if the specification code is big,the size will be big and the pressure will be high , the details in the technical characteristids chart. 
 3、The illustration of the seal code
   J:General mechanical seal 
   B:Metal corrugated pipe mechanical seal
 4、The illustration of the material code
   Ⅰ:Mainly adopting the genral engineering constructional steel 
   Ⅱ:Mainly adopting the martensitic corrosion resisting steel 
   Ⅲ:Mainly adopting the austenite corrosion resisting steel 

Material of the main parts
Material kind Parts name
Pump casing
20
0Crl3
0Crl8Ni9
Drving,driven shaft
45
3Crl3
lCrl8Ni9
Screws
38CrMoAl
3Crl3
lCrl8Ni9
Insert
QT600-3
ZGlCrl3
ZG0Crl8Ni9
If some other material needed, please consult with the manufacturer. 
 ●The main point must be considered when choosing pump. 
  1、Lubricity,degree of cleaning,corrosivity of the medium. 
  2、Viscosity,tenperature of the medium.
  3、Then medium pressure of the entrance,exit and the installing heighe. 
  4、Explosive-proof demands of the servce field 
  5、When ordering the product,please note the specification,type design pressure , speed of rotation,nedium viscosity,temperature,motor explosive-proof class,medium neme. 
 Eg:2W.W5.0-64-J-1,1.0MPa,980r/min,
 Mdeium viscosity: 500cSt,80℃,EXd2BT4
 Mdeium:heavy fuel oil 
 When choosing,certain escess amount should be left , in order to make it safety and dependable.

3.3G SERIES THREE SCREW PUMP

Application 
 It applies to deliver clean and non-corrosive medium which has lubricating troperty at temperature beow ≤150℃、with the viscosity of 5-760cSt,The pump's working pressure range from 0.6MPa to 2.5MPa and flow capacity range from 0.6-123m3/h.
Feature 
 (1)Medium is delivered in axial direction continuously without agitation and pulsation. 
 (2)Small vibration and low noise 
 (3)High pressure and high efficiency 
 (4)Simple structure,easy disassembly and assembly 
 (5)Small volume and lighe weight 
 (6)Slight wear and long life of the pump 
 Structure:The pumps are sealed generally by mechanical seal and driven by the motor through the claw coupling. 
 Material: The driving and driven screw 16MnCrS5,40Cr,45,38CrMoALA  Pump casing: HT200,QT450-10,ZCuSn10Pl,ZG270-500 
Example of pump model 
 Eg:3G25×4-46
 3G:three screw pump 
 25:out-side dizmeter of the driving screw 25mm
 4:potch number of the screw
 46:46° pitch angle of the screw 
 R:hezvy fuel oil 
 r:light fuel oil
 W:high temperature heated oil 
 N:high visc oil
 A:code of design improvement 
 S:double suction 
According to the application modes three screw pump is divided into five series
Series Main application Performancescope
Capacity m3/h Pre MPa
3G Lub oil visc3-20oE;temp≤80℃ 0.6-570 2.5
3GR Heavy feul lil visc3-50oE;temp≤120℃ 0.6-570 2.5
3GR Light feul oil visc1.2-5oE;temp≤120℃ 0.6-570 1.6
3GW High temp feul heated oil;temp≤150℃ 0.6-363 1.6
3GN High visc oil 100oE;temp≤80℃ 0.6-636 2.5
 


4.VERTICAL THREE SCREW PUMP

Features 
 characteristic:It has characteristics of steady operating,low nose,long life and high efficiency 
 temperature:The max. encironment temperature is 50℃,The max. use temperature is80℃。
 axle seal:This series of pump adopt mechanical sealing,It also adopts the filling seal according to the requirement of customer.
ModelExplanation
 3GCL:Vertical Marine Three Screws Pump 
 70:Specifications adn Code 
 2/1.0:Rated Pressure MPa
According to the application modes three screw pump is divided into five series 

Series Main application Performancescope
Capacity m3/h Pre MPa
3G Lub oil visc3-20oE;temp≤80℃ 0.6-570 2.5
3GR Heavy feul lil visc3-50oE;temp≤120℃ 0.6-570 2.5


Centrifugal Pump
1
.CYZ SERIES SELF-PRIMING ENTRIFUGAL OIL PUMP

Application  
 Type CYZ pump are used to deliver gas, kerosene diesel oil, etc. and the medium of tomperature with -20℃~ 80℃ .it is akind of load and unload oil pump in boat.And it is fitted in oil bunker,franker and of can be used to deliven seawafer fleash wcofer. 
Features 
 This pump belongs to self-absorption centifugal oil pump, it's features are simple construction, easy operation .well moving convenient repairing high displace ment high efficiency wide application slope etc. 
Contruction
 The pump is composed of suction room store liquid room vortex room,liquid returning hole,gas adn liquid dividing roon etc. The pumps adopt the single row radial bal l bearings , and have the cooling room in the bottom of the bearing stand , and a seal ring is used between the high press and low press area in the pump. They adopt mechanical seals on shaft end.

2.
RY SERIES AIR-COOLED HOT OIL PUMP

Brief Introduction 
 Type RY air-cooled hot oil pump is the energy conservation production designed and manufactured on the standard GB5662.
 With scientific construction and fine capacity, it is used in transporting high temperature liquid without solid particles. And the degree of corrosing resisting and working temperature is depended on the material of the main parts which connected with the medium.(The material consists of three kinds:1.HT200;2.ZG230-450;3,1Cr18N8-9Ti,OCr18N8912Mo2Ti). 
Application Scope 
 1、Petro-chemical Industry 
 2、Oil Industry 
 3、Synthetic-fibre Industry 
 4、Textile Dyeing And Printing Industry 
 5、Plastic And Rubber Industry 
 6、Papermaking Industry 
 7、Timber Processing Industry 
 8、Construction Industry 
 Besides the above fields the pumps are also proper in machinery manufacruring,food processing,Medicine making and the circling system for oil supplying of the hot oil boiler , the circling system of the heating installation. 
Performance Scope of RY Hot Oil Pump 
 1、Capacity : 1-500m3/h;
 2、Delivery lift : 10-125m;
 3、Temperature : -20。C-350。C; 
Then Sense of the type Ry hot oil pump

Set RY 100-65-200A As The Example
RY
100
65
200
A
Hot Oil Pump
The Inlet Diameter of Pump Case
The Outlet Dimeter of Pump Case
Vane wheel's Nominal Diameter of Pump Case

The First Cutting of Outer Diameter of The Vane wheel      

(D、E Represents Shaperforming wheel )


 
3.WZW SERIES SELF-PRIMING POLLUTED WATER PUMP

Features 
 This kind of pump'a self - priming ability is outstanding.It needn't install bottom valce.It can discharge dirt which solid soft particles is sixty percent of pump's port and fivre length can be five times as long as pump'a port. 
Application 
 The pump widely applies to delicering polluted water,fibre,solid pareicles,slag,paperpulp and so on. 
Structure 
 The pump is designed with store water room,horizontal bearing box.There're two kinds of axle-seals , mechanical seal and skeleton seal.There's an affusion entrance at the top of pump in order to poerate conveniently.

4.
AY TYPE SINGLE TOW--STAGE CENTRIFUGAL LUBRO-PUMP

Brief Introduction 
 AY-type lubro-pump series,which is reformed and redesigned on the base of oringinal Y type lubro-pump series.In order to meet the construction of the modernization an adapt to the requirement of replacing the old with the new one soon which is focused on the szcing the neergy, so we develop this new product,it has the follwing characteristics:
 1、The original bearing body parts 35,50,60 are replaced by bearing body 45,55,70,in this way its reliability can be increased. 
 2、The hydraulic excess flow part adopt the hydrauli model of the high efficiency energy-saving pump,in average,the efficiency is 5—8%higher than the old Y type lubro-pump 
 3、In order to keep inheriting,the structure pattern,installing size , 
 4、The lubro-pump patts hawe the strong all-purpose abllity,its general-standard parts can be commonly used by several series. 
 5、The affinage of its selecting materials way and the principals part is mainly made of Ⅱ、Ⅲ kind materizl , the materials of some parts such as bearing body is up to two kinds , that is casting steel and casting iron,in this way,it makes very adcantageous for being used in the coldarea,being wsed outdoor,using forshio-making . 
 6、According to the dinggerent sercice temperature,selecting hearing has three types,that is air cooling,air fan cooling,water cooling, Among them,air fan cooling is especially used for the atea where the water resource is lzck or the quality of water is worse. 
 AY-type single ,double lubro-pump series performance 
  Scope:Flow capacity: Q=2.5~600m3/h lift : H=30~330m Temperature: T=-45℃~+420℃ 
AY-type lubro-pump can be used in different field such as petroleum refining,petrochemical,chemical industry,the other field which transport the petroleum,liquid gas and the other medium which doesn't contain the particulate solids. 
 Type illustration 
  50AYⅡ60×2B,250AYS Ⅲ 150C 
  50,250--the diameter of suction port(mm) 
  A--The first time alteration  Y--centrifugal lubro-pump  S--the first impeller is double suction. 
  Ⅱ、Ⅲ--the code name of the excess flow part/s material :ⅠKind is HT250,ⅡKind is ZG230-450,ⅢKind is ZGCr13Ni。 
  60,150-single lift(m)  2--class 
  B,C--inpeller cutting times , the order will be showed as A、B…… 
Structure characteristics 
 AY-type lubro-pump can be divided into six kinds,that is single- stage single suction and two-stage single suction cantilever,single stage double suction cantilever ,single stage double suction and two stage double suction dual bearing type ,two stage single suceion dula bearing type . 
 The impeller is cat integrally,an after static balancing,the axial force of the pump is mainly depend on the balanced cavity of the impeller to keep its balancing. there are radial ball bearing and a set thrust ball beafing,which is installed back to back on the bearing body . is bearing adopt iol slinger to lubricate it . fins are cadt on the durface of the bearing body , it can be air -cooled ,we also can choose fan-cooling (T=120℃-260℃)and water-cooling(T=260℃-420℃)。
 In order to easily dismounting the parts such as impeller,shatr , bearing ro gaand seal ,meanwhile we don't need to dismantle the suction line or dis charge lin while the pump is on the ocerhaul,we always adopt metallic flexible laminated membrane couplings. 
The pump line system 
 1、Accdrding to the temperature and the demand of application we use cooling-water to cool the shaft seal cacity, beraing or pump mounting the water amount fou per pipe is 0.3-0.7m3/h,its pressure 0.2-0.3MPa。
 2、Sealing flush is changing according to the different transporting medium and its temperature rpessure or the other working condition,the seal liquid amout for per pump is as following table ,both inter -supply and outer -supply is suitable for that.

Sealing nominal diameter (mm) 13-47 48-59 60-84 85-95 96-133
Average seal liquid amount (m3/h) 0.18 0.24 0.36 0.48 0.66
  The pressure of the seal liquid is ususlly higher than the pressure of the sealing cacity 0.07-0.1MPa,if the transporting medium is easily vaporizing,the het pressure should be higher than the caporizing pressure 0.175-0.2MPa.
 3、Steam line is equipped in case the transporting medium is easily precipitation crystal;its pressure shoulr be 0.1MPa less or more. 
The material list of the excess flow patrs 
 According to the different service condition,the mai parts of the pump can be dicided int three dinds , the details is as following chart
Material type
service temperature -20℃~+150℃ -45℃~+420℃ -45℃~+420℃

Parts

name

Casing(case、over) HT250 ZG230-450 ZG 1Cr 13Ni
Impeller HT200 ZG230-450 ZG 1Cr 13Ni
Shaft 45 35Cr Mo 3 Cr 13
Casing gasket ring HT250 HT250 ZG 1Cr 13MoS
Impeller gasket ring QT500-7 QT500-7 3 Cr 13
Casing bolt Q235-A 35Cr Mo 35Cr Mo
Packing axle housing 3 Cr 13 1Cr 13堆碳化钨 1Cr 13堆碳化钨
Mechanical seal axle housing 3 Cr 13 3 Cr 13 3 Cr 13
● Potational Direction 
 Watching pump from prime mover,rotational direction is anticlockwise.

5.
CWZ SERIES HORIZONTAL CENTRIFUGAL SELF-PRIMING MAR

Brief introduction  
 CWZ series horizontal centrifugal self-priming marine pumps are well fixed and beautifully shaped and have highself-priming fuction.They can also be installed and used easily,which are best choices for the ships to drain water. 
 CWZ series horizontal centrifugal self-priming marine pumps are well used in all kinds of ships and warships for ballast,fire control,life water supply on the bilge.They can be used to pump sea water and fresh water, but the mediums'temperature should be lower than 80℃.
Instruction for the model code 
 Integer number of contrast revolution divided by ten 
 Horizontal 
 For ships 
 Diameter of inlet mm

6.CWX SERIES SELF-PRIMING GENTRIFUGAL VORTEX PUMPS


7.CLZ SERIES VERTICAL CENTRIFUGAL SELF-PRIMING MARIN

Brief introduction  
 CLZ series vertical centrifugal self-priming marine pumps are of small volumn,low weight and high function of self-priming.They're easily fixed and used. 
The type of pump is suitable for ballast,fire control,cooling and so on the bilge in all kinds of ships and warships .But the mediums'temperature should be lower than 80℃. 
Instruction for the model code 















8.CLH SERIES VERTICAL CENTRIFUGAL MARINE PUMPS

Brief introduction  
 CLH series vertical centrifugal marine pump os applied in all kinds of shipping and warship for ballast pump ,bilge pump, coolant pump,drainage pump and fire pump.It also used as neccessary feed pump for seawater desalting device and various tank equipument,and the booster pump for petroleum and and chemical industry pipelines,cold and hto water circulating system and high-rise building living water supply system.
Instruction for the model code 


 

Brand for Air compressor & spare parts
Jiangsu Zhenhua Pump, Tiantaishan water pump, Tianjin pump, Botou pump, Donghang water pump, Jiangsu Yuanyan water pump, Guangning pump,Shunda pump, Baiyun Pump, Nanfang Pump,  Qidong High Pressure oil pump,Grundfos, IMO, Desmi, Allweiler,  Azcue, Kral, KSB/ Itur, Heishin, Iron, Teikoku, Torex Sigma, Sasakura Pump, Hawe  Pump, Taiko Pump & Shinko pump, Sherwood Pump,Terada & Nippon


Pump model & spares
Tiantaishan pump
CYBW-10, CYBW-15,CYBW-20, CYBW-25, CYBW-40  DZ-500 DZ-1000 32CGW-10-20  2CWF-11
Jiangsu zhenhua pump  1.5CWX-2  65CWZ-6 CLH100-80-13AG CLH65-65-5.5(ZA)  CLH40-32-2Z  CLH50-32-4.5Z 80CWL-8 80CWL-14 1WZ-0.9 DNW0.2  CLH125-100-10A  50CLH4.5  150CWZ-16A 50CWL-5AG CLH80-65-11Z  100CWZ-14AG
Tianjin Pump TMS-65B-C3.7 ESH100-125-125 SPF20R56G11W21
Hebei Botou Pump YCB20-0.6  YCB60-1.0  YCB2.0/0.6-4  YCB1.0/1.1KW
Yancheng Ocean Pump CLH80-200  PVH/RG40-160B, 100CLH-160A
Guangning Pump 50CWZ-6  32CXZ-25  80CL-30
Bayi Universal Pump CISG80-160 65CZX35-45 CLH100-250A  1.5CWX-3A
Qidong oil Pump  63SCY-14-1B  108SCY-14-1B
Shun Da Pump  65CWL-11 50CWL-6 50CWL-8  65CWL-8
Wuhu Yangtze Pump CIHG40-160  CIHG80-160,
Chongqing Taiko Kangda CNJ-50 
Huanggong Pump  2HM68-36

Vacuum Pump vacdrain 15VMP
SHINKO SVA-200

Ejector Pump  WCP5-0.6
Oil Pump for Gear Box  BB-B16A
Engine Sea Water Pump  6HS-10/6  Z3900415/3900176
Tian Jin Haisheng High Pressure Pump HS-9028B-65/42
ITUR BOMBAS AU1-1/2/10A09

Tianjin Pump EMC-200MC-C18.5, EMC-100MG-18.5*2


PUMP ROOM EXH. FAN WITH ELEC. MOTOR 
MAKER: HI PRESS KOREA
TYPE: MXDN - 710/330
RF-135 COUPLING RING (RUBBER COUPLING)  2 PCS
       
BILGE SEPARATOR 
MAKER: TAIKO KIKAI
MODEL: USH-20
SERIAL NO.: W2-7263
  COALESCER  1 PCE

Distillate water pump jiangsu Baoying model: DNW1  
safety barrier D1072D for hamworthy oil pump C32BA 14-18 V64  
air supply pump HIBLOW  HP-200 TW-2008

CAT Parts 395-1646 PUMP
SERVICE KIT P/N : 433-1656
BALL BEARING P/N : 7F-9993
SHAFT P/N : 391-8009
gear pump HGP-1A-F6R 1405D12
Grundfos vertical multi-stage centrifugal pump CR 5-29 A-FGJ-A-E-HQQE




Previous:Valve
Next:Air compressor and parts
Copyright © All 2013-2014 Powered by 022host.com